Amioleodinamica
| Manufactured in 1 to 5 sections | |
| Nominal flow rate | 120 l/min |
| MAX working pressure | 220 bar |
| MAX return backpressure | 50 bar |
| Standard PRESSURE RELIEF valve, may be set | da 10 a 220 bar |
| Single-acting check valve for each section Negative spool overlapping | |
| Reversing spool for right-hand or left-hand inlet Preset for CARRY-OVER | |
| Working temperature | min.-30°C ÷ max. 80°C |
| MAX spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) | 21 ml/min |
| MODEL | L (MM) | F (MM) | WEIGHT (KG) |
| AMI 701 (1 section) | 153 | 128 | 11,900 |
| AMI 702 (2 sections) | 198 | 173 | 16,400 |
| AMI 703 (3 sections) | 243 | 218 | 20,900 |
| AMI 704 (4 sections) | 288 | 263 | 25,400 |
| AMI 705 (5 sections) | 333 | 308 | 29,900 |
| Manufactured in 1 to 5 sections | |
| Nominal flow rate | 120 l/min |
| MAX working pressure | 220 bar |
| MAX return backpressure | 50 bar |
| Standard PRESSURE RELIEF valve, may be set | da 10 a 220 bar |
| Single-acting check valve for each section Negative spool overlapping | |
| Reversing spool for right-hand or left-hand inlet Preset for CARRY-OVER | |
| Working temperature | min.-30°C ÷ max. 80°C |
| MAX spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) | 21 ml/min |
| MODEL | L (MM) | F (MM) | WEIGHT (KG) |
| AMI 701 (1 section) | 153 | 128 | 11,900 |
| AMI 702 (2 sections) | 198 | 173 | 16,400 |
| AMI 703 (3 sections) | 243 | 218 | 20,900 |
| AMI 704 (4 sections) | 288 | 263 | 25,400 |
| AMI 705 (5 sections) | 333 | 308 | 29,900 |
CONTACTS
Registered office:
Via Vincenzo Vela, 14
40138 – Bologna (Bo) Italy
Operational headquarters:
Via dell’Artigianato, 36
40027 – MORDANO (Bo) Italy
Mail: ami@amioleodinamica.com
Tel. +39 0542 52925
© 2022 AMI Oleodinamica | Powered by Studio Montevecchi