MONOBLOCK DIRECTIONAL CONTROL VALVE
AmioleodinamicaAmioleodinamica
| Manufactured in one section only | |
| Nominal flow rate | 45 l/min |
| MAX working pressure | 350 bar |
| MAX return backpressure | 80 bar |
| Standard PRESSURE RELIEF valve, may be set (on request may be set from 10 to 250 bar) | da 60 a 300 bar |
| Single-acting check valve on inlet Negative spool overlapping | |
| Reversing spool for right-hand or left-hand inlet except AB2 spool Preset for CARRY-OVER | |
| Working temperature | min.-30°C ÷ max. 80°C |
| MAX spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) | 18 ml/min |
| Weight | 3,400 kg |
| Manufactured in one section only | |
| Nominal flow rate | 35 l/min |
| MAX working pressure | 220 bar |
| MAX return backpressure | 10 – 12 bar |
| Standard PRESSURE RELIEF valve, may be set (on request may be set from 10 to 250 bar) | da 60 a 300 bar |
| Single-acting check valve on inlet Negative spool overlapping | |
| Preset for CARRY-OVER | |
| Working temperature | min.-30°C ÷ max. 80°C |
| MAX spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) | 30 – 35 ml/min |
| Absorption | |
| for 12 Vdc (H70) | 36 Watt, 3 Ampere |
| for 24 Vdc (H71) | 36 Watt, 1,50 Ampere |
| Weight | 3,500 kg |
| Manufactured in one section only | |
| Nominal flow rate | 45 l/min |
| MAX working pressure | 350 bar |
| MAX return backpressure | 80 bar |
| Standard PRESSURE RELIEF valve, may be set (on request may be set from 10 to 250 bar) | da 60 a 300 bar |
| Single-acting check valve on inlet Negative spool overlapping | |
| Reversing spool for right-hand or left-hand inlet except AB2 spool Preset for CARRY-OVER | |
| Working temperature | min.-30°C ÷ max. 80°C |
| MAX spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) | 18 ml/min |
| Weight | 3,400 kg |
| Manufactured in one section only | |
| Nominal flow rate | 35 l/min |
| MAX working pressure | 220 bar |
| MAX return backpressure | 10 – 12 bar |
| Standard PRESSURE RELIEF valve, may be set (on request may be set from 10 to 250 bar) | da 60 a 300 bar |
| Single-acting check valve on inlet Negative spool overlapping | |
| Preset for CARRY-OVER | |
| Working temperature | min.-30°C ÷ max. 80°C |
| MAX spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) | 30 – 35 ml/min |
| Absorption | |
| for 12 Vdc (H70) | 36 Watt, 3 Ampere |
| for 24 Vdc (H71) | 36 Watt, 1,50 Ampere |
| Weight | 3,500 kg |
CONTACTS
Registered office:
Via Vincenzo Vela, 14
40138 – Bologna (Bo) Italy
Operational headquarters:
Via dell’Artigianato, 36
40027 – MORDANO (Bo) Italy
Mail: ami@amioleodinamica.com
Tel. +39 0542 52925
© 2022 AMI Oleodinamica | Powered by Studio Montevecchi